Capoforte SQ240i, the first electric model by the Italian brand, will be on display at the next boot Düsseldorf (21-29 January 2023) and will be equipped with the 50kW Molabo ISCAD V50 inboard motor. This happened after quite a success at the most recent Genoa Boat Show (which included winning the Design Innovation Award 2022 in the “Motor boats up to 10m” category). 


Molabo ISCAD version

With its 7.38 meter length and 2.46 meter width, Capoforte SQ240i can carry up to ten people, thus concentrating a new sailing philosophy in less than eight meters.


Molabo ISCAD version

For this model, Christian Grande has thought of shapes specially designed for the electric drive. “The lines must not express speed, but must be harmonious, closely linked to a relaxed and relaxing type of navigation,” he explained. “Capoforte has also succeeded in interpreting the soul of this owner, who is not looking for speed. From an engineering point of view, a specific type of lamination was chosen, suitably designed to achieve the best performance in terms of efficiency, with this type of propulsion.” 


Molabo ISCAD version

The wide, rounded bow permits a deck layout centring around comfort. The entire hull is made with infusion technology. At the second configuration, the entire bow section of the boat is transformed into a full-beam sundeck for maximum comfort

The central console makes it easy to move about safely. The presence of a large central sundeck at the stern permits full enjoyment of the convenient full-width swim platform. 


Molabo ISCAD version

The model on display at Boot 2023 has a Molabo ISCAD V50 electric motor, a 50kW straight-shaft inboard motor, which weighs only 45 kg. Its low voltage components ensure the motor’s high performance and efficient use of the battery, thanks also to the development of the synergy between the controller interface and the motor itself.


Yamaha HARMO version

ISCAD combines motor and controller in one unit. This solution is easily integrated on board, reducing wiring and the space required for installation. Integration and maintenance are easy because no high voltage safety measures are required. Low-voltage (48V) components therefore efficiently use the battery's energy, achieving a measured system efficiency of over 95% in optimum operating conditions.


Molabo ISCAD version

Like the first model produced and previewed at the most recent Genoa Boat Show, the Capoforte SQ240i has been designed to house the 3.7kW HARMO Yamaha outboard propulsion system, which is equipped with rim-drive technology for particularly efficient electric propulsion, when compared with a propeller of the same size. It is also a propulsion system that guarantees extremely easy maneuvering, even in limited space.

Capoforte has twenty years of experience in boatbuilding. Over one hundred people work at the building site of Roccelletta di Borgia, close to Catanzaro. The yards extend to a production area of 19,500 sq. m, of which 9,500 covered. 

Credits: Capoforte

Latest News

New 66m Gran Turismo Revealed by ISA Yachts
ISA Yachts, a brand of Palumbo Superyachts, has launched the ISA GT 66-meter model as part of its Gran Turismo yacht series. The exterior design was developed by Team for Design - Enrico Gobbi.The yacht features a metallic blue-grey exterior with a long teak bow designed as a multifunctional lounge area. The design includes floor-to-ceiling windows and wide side decks with glass balustrades. A sky lounge integrated into the profile can be customized as a dining area, gym, or panoramic lounge with a hot tub. The aft main deck features an infinity pool with adjacent lounge areas.The interior incorporates organic furnishings with materials including wood, wenge inserts, marble, and satin-finish brass. The main deck contains a full-beam master stateroom with a walk-in closet, bathroom, and lounge area, along with two guest cabins. The lower deck accommodates four additional double cabins.The wellness area includes a spa and fold-out platforms providing direct access to the sea. The yacht maintains the sport-oriented design characteristics of the Gran Turismo line while emphasizing social areas and natural light throughout interior spaces.Palumbo Superyachts took root in 2008, when the Columbus Yachts brand was established, and in 2011 it launched its first 54m superyacht, emblematically christened Prima (the First). Currently, Palumbo Superyachts comprises a representative office in Monaco and a logistics network of five shipyards in the Mediterranean (Ancona, Malta, Marseille, Naples, and Savona); it also operates the following brands: ISA Yachts, Columbus Yachts, Mondomarine and Palumbo SY Refit.Credits: ISA Yachts
Gruppo Antonini Awarded IRENA 3 Offshore Platform Contract by EDINA
Gruppo Antonini S.p.A. has been awarded the IRENA 3 EPC project by EDINA, a joint venture between Edison Gas and Croatian operator INA. The contract value is approximately €23 million. Gruppo Antonini will serve as the agent in a consortium with two other companies.The project involves the engineering, construction, and installation of an offshore platform in the Northern Adriatic. The platform will consist of a jacket, foundation piles, and a topside with a total weight of approximately 800 tons. It will be installed at a depth of 35 meters and connected via pipeline to the existing Izabela North platform.A distinctive feature of the platform is its energy system, which will be powered entirely by photovoltaic panels. The facility will be fully automated and controlled remotely through a distributed control system (DCS) that allows remote monitoring of process parameters.This project represents the first of eight planned offshore developments in the Northern Adriatic aimed at increasing production from the IVANA gas field. The contract includes supply of materials, engineering, construction, pre-commissioning, commissioning, marine transport, and offshore hook-up operations.This award follows other major projects secured by Gruppo Antonini in Libya and the northern Adriatic region in 2024.Antonini Navi, the maxi-yacht builder established in 2019 by the storied Gruppo Antonini Spa and managed directly by the same family in close partnership with partner and commercial director Aldo Manna.Credits: Antonini Navi
Forte Yachts Nears Completion of First Forte 47 Model
Forte Yachts is in the final stages of construction for its first model, the Forte 47. The 14-meter yacht, which debuted at the 2025 Cannes Yachting Festival, is scheduled for launch in November 2025. The vessel is being built at the company's shipyard in Ameglia, Italy.The aluminum-built yacht features a vertical bow and a hardtop that spans over half its length. Its most distinctive feature consists of two fold-out terraces positioned amidships, which open outward to create sea-level lounge areas. The deck design incorporates a walkway only on the port side to maximize interior volume.The yacht is available in two configurations. The Gran Turismo version uses triple Mercury V12 600hp outboard engines with an estimated top speed of 45 knots. The Lounge Deck version features twin Volvo Penta IPS D8-800 inboard engines and an enclosed saloon with full-height glazing.The interior includes two cabins and two bathrooms with separate showers, with headroom exceeding two meters throughout. The hull design by Umberto Tagliavini of Marine Design emphasizes stability and efficient planing.Technical Manager Livio Franchini stated: "Opening the terraces transforms the yacht entirely. It creates a seamless connection with the sea that feels unprecedented in a 14-meter vessel."Brand co-founder Fernando Moricca stated: "Our clients are not just buying a boat; they are creating a tailored experience. The aluminium build allows us to adapt every element to individual tastes and requirements."Paolo Giordano, Head of Design, stated: "We wanted to ensure that the yacht feels like a true home on the water and challenge what owners expect in this size range. Every detail, from bathroom height to kitchen layout, has been crafted with liveability in mind."Current construction status includes completed hull, superstructure, and deck awaiting pre-paint treatment. Engine installation and interior assembly are underway, with the engine room reported to be 80% complete.Credits: Forte Yachts
50m Sailing Yacht Concept AERA Unveiled by Royal Huisman
Royal Huisman has unveiled a 50-meter concept yacht named AERA. The design incorporates a wing sail system and fuel cell technology aimed at reducing emissions. The concept follows the shipyard's 2024 launch of Project Tidal Shift, an environmental initiative focused on ecological preservation.The yacht's wing sail, developed by Artemis Technologies and Rondal, measures 245 square meters and is capable of rotating 360 degrees. The unstayed wing sail system does not require traditional sails, sheets, blocks, or winches. Two electric motors inside the yacht rotate the mast, while hydraulic cylinders control adjustable flaps along its trailing edge.AERA is designed to operate under 500 gross tonnage. The concept results from a collaboration between Royal Huisman, Rondal, designer Cor D. Rover, and Artemis Technologies. The design allows the vessel to function under both sail and power.Royal Huisman previously delivered the world's first hybrid superyacht, Ethereal, in 2009. The shipyard states that AERA represents a continuation of its focus on integrating new technologies to address sustainability in yacht building.Royal Huisman is a Dutch shipyard established in 1884 in Ronduite, building and refitting custom luxury sailing and motor yachts at its shipyard in Vollenhove, the Netherlands.Credit: Royal Huisman
Tankoa Yachts Acquires Business Division of Otam
Tankoa Yachts has completed the acquisition of the business division of Otam. The transaction, finalized in agreement with both companies' founding families, includes the Otam brand and its historic shipyard in Genoa. The dockyard facilities in Santa Margherita Ligure remain under the current ownership.The acquired Genoa facility comprises approximately 4,800 square meters of covered areas, 3,300 square meters of open-air spaces, and a water basin of nearly 10,000 square meters. Tankoa Yachts plans to implement a restructuring program that will include extending concessions, reorganizing the areas, and constructing new production sheds.The operation includes the integration of Otam's workforce into Tankoa Yachts. All employees are being transferred to ensure job continuity and to add new skills and experience to the shipyard.The Otam brand, with its existing heritage and international reputation, becomes part of Tankoa's portfolio. Tankoa Yachts stated it will preserve the brand's legacy while defining a strategy aligned with its long-term vision.This acquisition represents a continuation of the expansion project Tankoa Yachts presented at the beginning of 2025 and strengthens the company's presence in the Genoa region.Credits: Tankoa Yacht