Aiming to tackle one of boating’s most stressful maneuvers – docking – Volvo Penta has revealed an advanced self-docking solution, targeted for launch in 2020.
The Gothenburg, Sweden, stopover of the Volvo Ocean Race was the scene for the unveiling of what could be the most sought-after system in modern boating – Volvo Penta’s self-docking system. In a live demonstration, a 68 ft yacht fitted with the technology skillfully maneuvered itself into the tightest of spaces between two of the Volvo Ocean Race 65 racing yachts.
The unveiling of the pioneering self-docking yacht technology is the latest in Volvo Penta’s ongoing ‘Easy Boating’ philosophy to make boating simple, enjoyable and accessible to more people. At its heart is the joystick-controlled Volvo Penta Inboard Performance System (IPS), a complete and integrated propulsion system – from the helm station, via the engine, all the way to the propellers.
Narrow berths, changing wind and sea conditions and congested marinas will all soon be less of a challenge when docking. This is thanks to the responsiveness of the Volvo Penta IPS system, coupled with sensors and advanced navigation processing power. And, just as the system helps get the boat into the dock easily and safely, it can also enable it to securely take-off from the dock in an automated fashion.
Prototypes of Volvo Penta’s self-docking technology are currently undergoing development trials. The automated docking capability comes due to the onboard electronic vessel control system (EVC), which computes steering and drive calculations in relation to the boat’s actual position and four sensors sited on the intended berth.
Easy docking
“Docking is one of the most challenging boat handling maneuvers – getting it wrong can be embarrassing, expensive and precarious,” says Björn Ingemanson, President of Volvo Penta. “Our IPS system has already taken great strides in making docking easier, and this new self-docking feature takes that process one important stage further. Its sensors and onboard computers react in milliseconds to changing wind and sea conditions, constantly making micro adjustments in power and steering angle of the IPS drive to keep the boat on its intended course into a safe berth. If necessary, the docking process can be paused, and the system will hold the boat stationary in the water. Even in changing sea conditions it can make the sea appear to stand still.”
How it works
Automating the docking process involves three distinct phases. Firstly, as the boat nears its berth, the system recognizes that it has entered a ‘catch zone’ and sends out a signal to the captain that it is ready to dock. Once the captain has activated the self-docking function, the boat is then (aided by GPS), automatically moved into a ‘docking ready’ position. Once the captain has initiated the final stage, the system uses a combination of GPS and sensors, both those fitted onboard and additional sensors fitted to the destination dock to automatically move the boat into a safe berth.
“We have long had the ambition to make docking as easy as possible,” comments Johan Inden, Chief Technology Officer at Volvo Penta. “The first step towards this was in 2006, with the launch of our joystick docking technology. This was followed by the introduction of the Dynamic Positioning System, which automatically maintains a boat’s heading and position, even during strong currents or windy conditions – ideal when preparing for docking. Now, we are taking the next important step by enabling the boat to dock itself. With our easy docking concept, we aim to attract more people to enjoy the boating experience.”
Upgradeable option for Volvo Penta IPS-equipped yachts
Another attention-grabbing feature of the forthcoming system is that it will be available not only for the latest IPS equipped boats – a retrofit version of the function is also planned, something that would make an attractive upgrade to thousands of boat owners.
The initial focus for Volvo Penta’s self-docking system will be individuals who can install the system on their own private docks. Longer term, it is believed that the technology will be of considerable interest to harbors and marinas, allowing IPS-equipped boats fitted with the system to dock in complete safety and accuracy. An additional future scenario for the self-docking system is that it could be integrated with Volvo Penta’s Easy Connect application (app). The app could allow users to check if the nearest marina is equipped with the appropriate self-docking technology – or even perhaps use it to secure a parking space.
Sensors on the berth help guide the yacht safely into its docking position.
Safety is a primary factor in the ongoing development of the feature and, as with similar ‘self-parking’ technology in the automotive world, Volvo Penta’s docking system is not designed to be fully autonomous. While the system will also feature surround sensors that provide anti-collision alert and avoidance, the captain needs to remain at the helm during the docking process, ready to intervene if necessary.
Check our Timeline platform to get the full access to our analytics platform, that offers you a detailed report on the timeline of each superyacht, real time market view to see the yacht market developing and much more!
The first 45-meter yacht constructed at Tankoa Yachts' new Civitavecchia production site has completed its transfer to the company's Genoa shipyard. The T450 series vessel arrived via barge after a two-day maritime transport operation, marking a milestone in Tankoa's expansion strategy.Construction of the aluminum hull and superstructure, along with initial machinery installation, was completed at the Civitavecchia facility before the transfer. The logistics operation required transporting the hull by trailer to the quay, loading onto a barge, and final delivery to Tankoa's private docking area in Genoa. The yacht will now undergo final outfitting in preparation for launch.Tankoa has invested approximately €5 million to establish operations at the Civitavecchia site, which obtained its port concession in December 2023. The facility currently employs 120 workers and has five yachts in various construction phases."This transfer demonstrates our long-term commitment to Civitavecchia," stated Tankoa CEO Vincenzo Poerio. "We're now focused on developing the local supply chain to create an efficient production hub that benefits both the region and Italy's yacht-building industry."The Civitavecchia expansion increases Tankoa's production capacity while establishing a new construction hub in the historic port city. The shipyard maintains its Genoa headquarters for final completion work and yacht deliveries.Tankoa was founded in 2007 and began production in 2008. A true “boutique shipyard”, focused on building semi-custom and custom constructions 45-meter and up.Credits: Tankoa
July 29, 2025
The 65-meter motor yacht Regina d'Italia has been listed for sale through Ocean Independence broker Marco Vandoni, marking the first time the vessel has been available since its 2019 delivery from Italian shipyard Codecasa.Constructed with a steel hull and aluminum superstructure, Regina d'Italia represents the third iteration of Codecasa's 65-meter platform, offering 1,215 gross tons of interior volume. The yacht's interior design was handled by M2 Atelier in collaboration with an unnamed fashion designer, resulting in minimalist spaces described by brokers as demonstrating "practical elegance."Accommodations include six cabins for up to 11 guests, featuring a 110-square-meter master suite on the main deck. Common areas comprise an open-plan main salon, combined cinema and skylounge, and fully-equipped gymnasium. A central elevator connects all decks.The upper deck aft hosts a formal dining area beneath the mirrored overhang of the sundeck, which itself contains a 7-meter forward-facing pool surrounded by sun loungers and a full-service bar. The yacht carries a complement of water toys including an Xtender tender, two Sea-Doo personal watercraft, and a Seabob underwater scooter.Powered by twin Caterpillar engines, Regina d'Italia achieves a top speed of 18.5 knots with a transatlantic range of 4,300 nautical miles at 13 knots. The RINA-classed vessel is equipped with zero-speed stabilizers for comfort at anchor.Codecasa shipyard was established in Viareggio in 1825 by the shipwright Giovanni Battista Codecasa. Still run by the founder’s heirs, nowadays the Codecasa Shipyards Group is able to offer a wide range of Yachts, featured by top quality, technologic innovation, reliability, design and comfort. The shipyard is known all over the world as builders of steel and light alloy motoryachts, ranging from 30 to 70 meters LOA.Credits: Ocean Independence
July 29, 2025
Spanish builder Maxim Yachts will present its 13-meter Max 43 Comfort daycruiser at the upcoming Cannes Yachting Festival. The yacht features design by Alex Cherigny and naval engineering by Isonaval, constructed with a fiberglass hull reinforced by carbon fiber components in structural areas.The vessel's twin Volvo Penta D6 440 engines deliver a top speed of 45 knots. The carbon fiber hardtop shelters a helm station equipped with dual 16-inch Garmin displays and eleven analog gauges. Below deck, two double cabins provide accommodation, with the forward master cabin offering additional storage space.The main salon contains an L-shaped convertible sofa and a fully-equipped galley with ceramic cooktop, stainless steel sink, and capacity for multiple refrigerators. Teak decking covers all exterior surfaces, including the bow and stern sunbathing areas with removable cushions. The aft section incorporates fold-down terraces that increase total beam width by 1 meter when deployed.Entertainment systems include a JL Audio setup with eight speakers and two amplifiers. The yacht's construction utilizes vacuum-bagged fiberglass laminates with carbon fiber reinforcements in high-stress areas. This marks Maxim Yachts' first participation at the Cannes show following previous appearances at Genoa and other international boat exhibitions. Credits: Maxim Yachts
July 29, 2025
Azimut has unveiled its new 38.2-meter Grande Trideck superyacht, marking a design evolution for the Italian builder's flagship series. The vessel features interiors by Milan-based studio m2atelier, implementing their "Barefoot Luxury" concept focused on informal sophistication.The exterior design by Alberto Mancini retains Azimut's characteristic sleek profile while incorporating new elements like a recessed foredeck pool with integrated chaise lounge. The interior architecture emphasizes clean geometries, with straight horizontal and vertical lines creating an expanded sense of space. Diagonal elements appear selectively to establish intimate areas within the open layout.Notable interior features include a signature "Unveiling Wall" in the main salon - a motorized panel of vertical wood slats that slides open to reveal a hidden television. Floor-to-ceiling glazing throughout guest areas maintains visual connections to the seascape. The owner's suite utilizes layered glass partitions to preserve sightlines while ensuring privacy.Custom furniture pieces designed by m2atelier and manufactured by Giorgetti follow the Integral Design approach, ensuring stylistic continuity throughout all interior elements. The Sky Lounge incorporates a convertible hi-lo table that transforms the space between lounge, dining area and media room configurations."Light becomes the invisible thread that connects every environment," explained m2atelier founders Marijana Radovic and Marco Bonelli. The lighting design uses concealed LED strips and strategic window placement to accentuate material textures and spatial volumes.The Grande Trideck represents the first of three new models in Azimut's redesigned Grande series, with two additional yachts scheduled for debut at the September 2025 Cannes Yachting Festival. Technical specifications including propulsion systems and performance data remain undisclosed at this stage.Azimut's Product Design Director Federico Lantero described the project as creating "an atmosphere that evolves with those who experience it" rather than focusing on traditional displays of luxury. The design separates crew circulation routes while maintaining visual openness in all guest areas.Azimut Yachts is an Azimut Benetti Group brand. With its Atlantis, Magellano Flybridge, S, Verve and Grande collections, Azimut offers the widest range of 10 to 40 meters.Credits: Azimut Yachts
July 28, 2025
Ferretti Group's Pershing brand has introduced the GTX70, the smallest model in its Sport Utility Yacht series, measuring 21.76 meters (71'4") in length with a 5.42-meter (17'9") beam. The yacht made its world premiere during Pershing's 40th anniversary celebrations in Capri, Italy.Developed through collaboration between the Ferretti Group Product Strategy Committee led by Piero Ferrari, Vallicelli Design, and the Group's Engineering Department, the GTX70 was constructed at the Ferretti Group's Plug and Mould facility in Mondolfo. The yacht represents a more compact interpretation of Pershing's GTX concept, combining sporty performance with increased livability compared to similar-sized vessels.The GTX70 is powered by three Volvo Penta D13 IPS1200 engines, each producing 900 horsepower. Preliminary performance data indicates a top speed of 36 knots and a cruising speed of 30 knots. The propulsion system incorporates Volvo IPS electro-hydraulic steering and is complemented by Humphree Interceptor trim control and Seakeeper gyroscopic stabilizers. The yacht holds CE Class A certification, the highest safety rating for vessels under 24 meters.Exterior spaces feature a two-level stern configuration with a 23-square-meter beach area that expands to nearly 8 meters in beam when side terraces are deployed. The swim platform utilizes dual linear lift technology, functioning both as a tender launch platform and an extended lounge area. The main deck offers 10% more interior space than comparable models, while exterior areas are 30% larger.Accommodations include three cabins for six guests: a full-beam master suite amidships with walk-in wardrobe, a forward VIP cabin, and a guest cabin with crosswise bed arrangement. Crew quarters forward contain two bunk beds and a separate bathroom. Interior design emphasizes spatial perception through mirrored surfaces and LED lighting strips by Altraluce.The 16-square-meter sportbridge divides into three functional areas: a sunbathing space aft, central dining section with L-shaped sofa and extendable table, and forward helm station. The area can be shaded by either a standard awning or an optional carbon fiber bimini top.Notable features include a main deck galley with retractable glass panel connecting to the cockpit, and a helm station with pillarless windscreen for 360-degree visibility. The bow area can be configured with either sun pads or a dinette featuring a convertible table.Construction utilized Pershing's plug and mould technology, with the hull and superstructure built at the Mondolfo facility dedicated to GTX series production. The yacht's design maintains signature GTX elements including the near-vertical bow and arch-shaped profile while introducing more compact proportions.The GTX70 joins the Pershing lineup as the brand's third GTX model, following the GTX80 and GTX116. Its debut coincides with Pershing's 40th anniversary year, marking the brand's continued expansion into the sport cruiser segment.The Ferretti Group, led by Chief Executive Officer Alberto Galassi, is now one of the world’s leaders in the construction and sale of luxury yachts and pleasure vessels, with a unique portfolio of brands: Ferretti Yachts, Riva, Pershing, Itama, Mochi Craft, CRN, Custom Line and Wally.Credits: Ferretti Group
July 28, 2025